Chainsaw Chain for 16" Bar, 3/8" LP, .043" Gauge, 55 Drive Links
Designed to fit most chainsaw models that require a 3/8" low-profile pitch, .043" (1.1 mm) gauge, 55 drive links. Ensure the correct selection by double-checking your chainsaw's bar length, drive link count, pitch, and gauge. Fits: Stihl - 017, 018, 019, E 140, MS 170, MS 171, MS 180, MS 180 C, MS 180 C-B, MS 180 C-BE, MS 180 G, MS 191T, MS 192 C, MS 192 C-E, MS 192 T, MS 193, MS 193 C-E, MS 201, MS 201 C, MS 201 C-E, MS 201 C-EM, MS 201 T, MS 201 T C-M, MSE 140, MSE 140 C, MSE 180, MSE 180 C Attention: This saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provisions of ANSI B175.1-2012. Low-kickback saw chain meets the kickback performance requirement of CSA standard Z62.3.
𝗩𝗘𝗥𝗜𝗙𝗬 𝗙𝗜𝗧: This saw chain is for chainsaw models that run 3/8" low-profile pitch, .043" (1.1 mm) gauge (guide bar slot), 55 drive links, 16" (40cm) bar and fits chainsaws up to 42cc - DOUBLE CHECK THE CHAINSAW MANUAL & VERIFY THE FIT
𝗙𝗜𝗧𝗦 𝗧𝗛𝗘𝗦𝗘 𝗖𝗛𝗔𝗜𝗡𝗦𝗔𝗪 𝗠𝗢𝗗𝗘𝗟𝗦: Stihl 017, 018, 019, 11482000212, 11482000213, 11482000215, E 140, MA01 200 0016, MS 162, MS 170, MS 171, MS 172, MS 180, MS 180 C, MS 180 C-B, MS 180 C-BE, MS 180 G, MS 191T, MS 192 C, MS 192 C-E, MS 192 T, MS 193, MS 193 C-E, MS 194 C, MS 201, MS 201 C, MS 201 C-E, MS 201 C-EM, MS 201 T, MS 201 T C-M, MSE 140, MSE 140 C, MSE 180, MSE 180 C
𝗥𝗘𝗣𝗟𝗔𝗖𝗘𝗠𝗘𝗡𝗧 𝗙𝗢𝗥: Stihl 3610 005 0055, 61PMM355E / Husqvarna H38-55
𝗟𝗢𝗪 𝗞𝗜𝗖𝗞𝗕𝗔𝗖𝗞: Bumper drive link paired with depth gauge design, offers reduced kickback with strong performance
𝗢𝗥𝗘𝗚𝗢𝗡 𝗤𝗨𝗔𝗟𝗜𝗧𝗬: The original pioneer and inventor of modern saw chain since 1947. Designed and engineered in the USA.




